Tennant T600 Squeegee Blades: Specs for Wholesale Buyers

Tennant T600 squeegee blades

Table of Contents

Aftermarket replacement part — not a genuine OEM part. The squeegee blades and rubber parts on this page are aftermarket replacements made to fit Tennant machines. They are not genuine Tennant parts, we are not affiliated with or endorsed by Tennant, and brand names, model names and part numbers are used for fitment reference only. Confirm dimensions against your own sample or drawing before ordering.

The first shipment is the easy part. A sample fits, the price is agreed, the cartons arrive. The problem shows up on the second reorder, when the blades look right but leave a trail, or the hardness has drifted, or the box holds twice as many front blades as rear ones. For a distributor buying the Tennant T600 profile in volume, the specification sheet is not a description of one blade. It is the contract for every blade that follows.

This page is about writing that specification so a repeat order reproduces the first one: the fields a purchase order needs, how the compound is named and checked, and the commercial terms for wholesale quantities.

What has to be on the purchase order

A one-off replacement can be ordered from a photograph. A standing order cannot. Six fields keep a bulk order reproducible:

Field What to state Why it drifts
Set definition One set = one front blade + one rear blade “Blades” alone gets quoted as single strips
Profile reference Your sample ID or drawing, plus straight or curved assembly Frames are revised between production runs
Compound Grade name and durometer as a range A bare number with no test method is not checkable
Quantity Sets per style, and how many styles Mixed orders need the split stated
Labelling Which carton holds which style and which half of the set Goods-in cannot sort an unlabelled mixed pallet
Inspection window When and how a claim is raised Freight lanes are long; the clock has to be defined

The first line is the one most often skipped. One set is one front blade plus one rear blade, and on a rider the two wear differently: the rear holds the vacuum seal across the width, while the front takes the debris and most of the abrasion. Order “100 blades” and you may receive 100 fronts. State the set definition on the order and again in the packing instruction.

On exact length, slot positions, hole pitch and thickness for your T600 build, we work from a sample or a drawing rather than a generic chart. Frame revisions vary between production runs and between regions, so anything we cannot confirm we say so instead of guessing. Send the worn blade or a clear photo of the frame and we will confirm before shipping or before cutting tooling. Where a dimension is missing from your drawing, ask us to confirm it rather than fill the gap with a catalogue figure.

Naming the compound so a batch can be checked

Hardness is the field that most often turns a reorder into an argument. State it as a range with a tolerance, not as a single number, and name the test method. Durometer is measured by the ASTM D2240 test method, and compound classification and batch-to-batch consistency are framed by ASTM D2000. Naming both costs two lines and removes the ambiguity a bare “65 Shore A” leaves behind.

Ask for readings taken off production pieces, not off a compounder’s test coupon. The coupon proves the mixer; the production piece proves the tool. A supplier promising a tolerance tighter than ±5 Shore A is promising something a production batch will not hold. Our grades carry a ±5 Shore A tolerance as standard:

  • Natural rubber, 65 ± 5 Shore A — smooth tile, PVC and epoxy. Conforms well to flat floors and gives the cleanest pickup. The default for most indoor commercial work.
  • Cast polyurethane, 85 ± 5 Shore A — rough or damaged concrete, expansion joints, oily and greasy surfaces, and long shifts over abrasive floors.
  • Economy gum rubber, 45 ± 5 Shore A — light duty on smooth floors where the decision is price-led and the area is small.

The full trade-off, including where each grade stops making sense, is set out in our material comparison. Two mistakes are expensive at volume. The first is assuming harder is always better: on polished tile a hard blade chatters and streaks, and more down-pressure makes it worse. The second is assuming red means premium — red is pigment, performance is formulation, which is why our red rubber sheet guide treats colour separately from specification.

Polyurethane generally gives the longest interval on rough or oily floors, but it is more sensitive to temperature and operating conditions than natural rubber. Sell it with that caveat attached rather than as a flat upgrade. A loading bay that is cold at opening and warm by midday is exactly where that caveat matters.

The model name is a reference, not a profile

The model name tells you which machine family the assembly belongs to. It does not tell you the profile. Two T600 units in the same fleet can ship with different squeegee frames, and a frame replaced or revised in service is a new profile, not a variant of the old one. This is the most common reason a repeat order fails to seal.

Our cross-reference guide lists the models and brands we already hold tooling for. Treat it as a starting list, not as a dimensional chart: confirm the profile against your own sample or drawing before ordering. Where an assembly has been changed in service, the safe move is to send the worn blade and let us match it rather than assume the catalogue entry still applies. Brand names and model names are fitment references throughout that process.

Service life and why the reorder date matters

Service life in normal commercial duty is typically two to three months, an industry figure rather than a guarantee. It moves with cleaning frequency, chemicals, temperature and floor condition, and a rider running daily across a large site will sit at the short end of that range. That is an argument for scheduling replacement rather than reacting to it — our replacement cycle guide covers the planning side, including how to set a reorder point from the number of units you run.

There is a safety dimension too. A squeegee that no longer seals leaves water on the walking surface, and slip hazards on wet floors fall under workplace rules such as OSHA 1910.22 in the United States. Blades are a small line item; the cost of a re-clean, a complaint or an incident is not. For a distributor, the margin usually sits in the gap against a captive OEM parts channel rather than in shaving the unit price, an argument developed in OEM vs aftermarket squeegee blades.

Commercial terms for wholesale quantities

  • MOQ 20 sets per style on a profile we already tool.
  • USD 60–120 tooling for a profile we do not hold, waived once cumulative volume reaches 500 sets.
  • Mixed orders allowed, with a USD 3,000 minimum order value, so a first container can cover a dozen models instead of committing the whole budget to one.
  • Samples are chargeable, not free, and take 7–15 days to prepare and ship.

Cumulative volume is counted across reorders, which is another reason to keep the spec sheet stable: a profile that changes between orders becomes a new tooling conversation rather than progress toward the 500-set threshold. Industry buying practice also favours consolidating styles into fewer, larger orders, and the ISSA resource material for the cleaning channel is a useful reference when building that case internally.

Settle the claim process before you pay

Blade complaints surface at goods-in, which on a long freight lane is weeks after manufacture. Agree the rules while the order is still open:

  • Claims raised within 7 days of receipt, counted from the delivery date, not from dispatch.
  • Only the defective pieces are replaced, not the whole batch.
  • An unboxing video is required, filmed from before the carton opens and close enough to show the defect.
  • Freight on replacement pieces is on the buyer; most importers absorb it by consolidating into the next shipment.

Coverage is for manufacturing defects: damaged or feathered edges, wrong dimensions, defective material, hardness outside the agreed range. It does not cover ordinary wear, fitting damage, or early wear caused by specifying the wrong compound for the floor. Putting this on the order protects both sides, because it makes the inspection window a date rather than an opinion.

Get a quote or a sample set

Send us the machine model, how many units you run, your floor type, and whether the assemblies are straight or curved. We will confirm the T600 profile against a sample or drawing, recommend a grade for your conditions, and quote a 20-set trial you can fit before committing to volume. Request pricing or a sample set and we will come back with lead time and freight options — and with a spec sheet your next reorder can actually repeat.

Facebook
LinkedIn
Twitter

Leave a Reply

Your email address will not be published. Required fields are marked *

seven + 2 =

Sign up and get

5% Off

On all squeegee blade

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@ntheron.com”.