Sign up and get
5% Off
On all squeegee blade
Brand fit centre · 17 brands · 75+ models
Find your brand. Go straight to its page.
Every machine brand we cut squeegee blades for is listed below with a link to its own fit page — model lists, part numbers and pricing for Tennant, Kärcher, Nilfisk, Comac, Taski, Viper, Hako and ten more.
Front + rear matched sets
Original-profile cutting
Mixed models in one order
Search by brand and model
If the machine has a squeegee, we probably cut for it.
Seventeen brands and seventy-five models are held as standard profiles. Each card opens that brand’s fit page with model lists and pricing.
TENNANT
T300 · T5 · T7 · T12 · T16 · T20 · 5680 · 5700 · TS 755
View Tennant blades →KÄRCHER
BR 30/4 · BD 38/12 · BD 50/50 · BR 40/10 · B 60 · B 80 · B 90 · B 150
View Kärcher blades →NILFISK
BA 531 · BA 551 · BA 611 · SC 400 · SC 450 · SC 650 · SC 800 · SC 1000
View Nilfisk blades →COMAC
Visio 800 · Visio 1000 · Innova 55 · Innova 85 · Concept 80 · CM 50h
View Comac blades →TASKI & VIPER
Swingo 455 · Swingo 955 · Dorsalino · AS430C · AS5160 · AS710R
View Taski blades →HAKO & MORE
B45 · B60 · B910 · plus ten further brands, including GM 50B, MY 50 and Fang 20
View Hako blades →
Model not listed?
Send a photo of the nameplate. If we do not hold the profile yet, a new mould runs $60-120 and the charge is refunded once cumulative orders for that profile reach 500 sets.
Tennant T500e blade sizes
Width, thickness and mounting for the T500e, with the matched front and rear part numbers.
Read model guide →Tennant T300 blade fit
The walk-behind workhorse: which profiles fit, and how to measure the worn set.
Read model guide →Hako B45 / B115R blades
Original-profile replacements for the B45 family, including the B115R rear blade.
Read model guide →How to identify your blade
Three minutes to the right part number.
01
Find the nameplate
Every scrubber carries a model plate near the battery bay or control panel. One clear photo is enough — you do not need to remove the worn blade first.
02
Match or measure
If the profile is on our list we quote straight away. If not, measure the old blade’s width, thickness and mounting — or post the worn one to us.
03
Approve the sample
Samples ship in 7-15 days. Fit one set on a single machine, run it for a week, then scale the order across the fleet.
What service teams say
“Our service team used to guess blade sizes from memory. Now we send one photo and the right set arrives with the machine’s own part number printed on the box.”
Fitting and ordering questions
Before you commit a fleet to one supplier.
Do you stock every model on the list?
Fast movers ship from stock. Slower profiles are cut to order, which adds about a week to lead time. Either way the 20-set minimum counts across the whole order.
Will a replacement blade affect my machine warranty?
Squeegee blades are a wearing part, like tyres on a truck. Ours match the original profile and mounting, so they are treated as normal consumables by every major brand.
Can I order front and rear blades separately?
Yes, though they ship as matched sets by default. Most buyers order the set, because wear on the two edges is rarely even across a fleet.
What is the lead time for a container order?
Stocked profiles leave in 7-10 days. Custom profiles add 7-15 days for sampling. Sea freight time depends on your port and is quoted together with the price.
Check your fleet
Tell us the machine. We’ll tell you the blade.
One model number or one nameplate photo is enough to start. Quotes come back inside a working day.
Check My Machine Model75+ models covered · Mixed orders welcome · Quotes in 24h