Aftermarket replacement part — not a genuine OEM part. The squeegee blades and rubber parts on this page are aftermarket replacements made to fit Tennant machines. They are not genuine Tennant parts, we are not affiliated with or endorsed by Tennant, and brand names, model names and part numbers are used for fitment reference only. Confirm dimensions against your own sample or drawing before ordering.
The worst time to work out what fits a Tennant M30 is the morning it starts leaving a wet trail across a warehouse floor. By then the machine is out of service, the operator is waiting, and every day spent qualifying a blade is a day of lost cleaning capacity. Fitment on a large rider is not a question you resolve at the point of failure. It is a small dossier you build once, while the machine is still running, so that every later order is a one-line request.
This page covers the dossier, the dimensions we will not guess at, the lead time to budget, and the order terms.
Build the fitment dossier before you need it
Most of the back-and-forth on a first order is not about price. It is about information that could have been collected in ten minutes during a routine service. Five items settle almost every fitment question we get:
| Item | What to send | Why it decides the order |
|---|---|---|
| Worn blade set | The front and rear blade from one machine, or clear end-on and face-on photos | One set is one front blade plus one rear blade; they are not interchangeable |
| Assembly view | A photo of the frame showing whether it is straight or curved, plus the clamp or hole layout | A frame replaced in service is a new profile regardless of the badge |
| Floor and chemical context | Surface type, degreaser or solvent in use, typical shift length | Drives the compound choice, not the fitment |
| Fleet size | Number of M30 units and roughly how many hours each runs | Sets the reorder quantity and the safety stock |
| Sample ID | Your own reference for the blade you sent | Ties every reorder to a physical reference instead of a catalogue line |
Send these once and the dossier becomes the order reference. Keep the labelled sample at goods-in; months later it is the only artefact both sides can still compare against. The Tennant official site is the right starting point for machine documentation, though it will not tell you which aftermarket profile fits your frame.
The honest limit of a fitment claim
A model name identifies a machine family. It does not define slot width, lip geometry, thickness, hole pitch or overall length. We do not publish dimensions, OEM part numbers or abrasion test values we cannot confirm from your sample or drawing; a plausible-looking guess that seats at the wrong lip angle leaves a trail and gets blamed on the vacuum system.
Three situations make an M30 a new profile even when the badge is unchanged: a frame replaced with a non-original assembly, an earlier production run with a revised frame, or a blade set trimmed or re-drilled on site. Treat each as a fresh fitment and send the worn blade.
Our cross-reference guide lists the profiles we already hold tooling for; use it as a starting list, then confirm against your sample or drawing. Exact length, hole positions and thickness are confirmed with us before shipping and before tooling is cut. Where a dimension is missing, ask us rather than filling the gap with a catalogue figure.
One distinction belongs in the dossier: one set is one front blade plus one rear blade. On a rider the rear carries the vacuum seal across the width, while the front takes the debris and most of the abrasion. Quote requests saying only “M30 blades” are routinely priced as single strips, so state the split.
Budget the qualification lead time
The counter-intuitive part of replacement planning is that the constraint is rarely the blade itself. It is the calendar between deciding to qualify a profile and having a usable set on the shelf.
Service life in normal commercial duty is typically two to three months, an industry figure rather than a guarantee. It moves with cleaning frequency, chemicals, temperature and floor condition. That interval is not a promise; it is a planning input. Our replacement cycle guide shows how to turn it into a reorder point from the number of units your customers run.
Work backwards from it. Samples are chargeable, not free, and take 7–15 days to prepare and ship; a profile we do not tool adds a cutting step. Start qualification when the first streaks appear and the machine is down for the whole window. Build the dossier on a healthy machine and an emergency becomes a scheduled reorder.
For wholesale quantities the terms are fixed:
- MOQ 20 sets per style on a profile we already tool.
- USD 60–120 tooling for a new style, waived once cumulative volume reaches 500 sets.
- Mixed orders allowed, with a USD 3,000 minimum order value, so one shipment can cover several models instead of committing the whole budget to one.
Cumulative volume counts across reorders, so a stable profile moves toward the tooling threshold instead of restarting it. A rider covers far more floor per shift than a walk-behind, so the same lip wear leaves a much larger wet area. That is why a spare set on the shelf is worth more than a lower unit price: OSHA 1910.22 is the US reference for keeping walking surfaces in a safe condition.
Choose the compound once, then keep it on file
Hardness belongs in the dossier as a range with a tolerance and a named test method. Durometer is measured by ASTM D2240; classification and batch consistency are framed by ASTM D2000. Ask for readings off production pieces, not a compounder’s coupon. Our grades carry a ±5 Shore A tolerance:
- Natural rubber, 65 ± 5 Shore A — smooth tile, PVC and sealed epoxy. Conforms well to flat floors and gives the cleanest pickup. The default for most indoor commercial work.
- Cast polyurethane, 85 ± 5 Shore A — rough or damaged concrete, expansion joints, oily and greasy surfaces, and long shifts over abrasive floors.
- Economy gum rubber, 45 ± 5 Shore A — light duty on smooth floors where the decision is price-led and the area is small.
Polyurethane generally lasts longest on rough or oily floors, but it is more sensitive to temperature and operating conditions than natural rubber, so it is not a flat upgrade for every site. The full trade-off, including where each grade stops making sense, is set out in our material comparison. Colour is not a specification either: red is pigment, performance is formulation, which is why our red rubber sheet guide treats the two separately.
If the floor changes — a sealed epoxy area is replaced with broom-finished concrete, or a new degreaser enters the cleaning programme — re-open the compound decision. Fitment stays the same; material does not.
Receiving: the seven-day window starts at the door
Claims are agreed on the order, not after it. The window is 7 days from receipt, counted from the delivery date rather than dispatch; only the defective pieces are replaced, not the whole batch; an unboxing video filmed from before the carton opens is required; and freight on replacement pieces falls to the buyer, which most importers absorb by consolidating into the next shipment.
So the receiving step belongs in the dossier too. Open cartons against the sample ID, check the front and rear split, and compare the profile before fitting. Coverage is for manufacturing defects — damaged edges, wrong dimensions, hardness outside the agreed range — not ordinary wear, fitting damage, or the wrong compound for the floor. Ask for carton labelling by style and by half of the set.
Consolidating styles into fewer, larger orders is standard practice in the cleaning channel, and ISSA material is a useful reference when making that case internally. The margin on this line usually sits in the gap against a captive OEM parts channel rather than in shaving unit price, an argument developed in OEM vs aftermarket squeegee blades.
Get a quote or a sample set
Send the five dossier items: worn front and rear blade or photos, assembly view, floor and chemical context, fleet size, and your sample ID. We will confirm the profile against your sample or drawing, say whether we already hold tooling, recommend a grade, and quote a 20-set trial. Request pricing or a sample set and we will come back with lead time and freight options.
Do it while the machine is still cleaning. A blade that fits is decided weeks before you need it, not on the morning the floor stays wet.