Aftermarket replacement parts — not genuine OEM parts. The squeegee blades and rubber parts on this page are aftermarket replacements made to fit the machines named here (Nilfisk and Tennant). They are not genuine parts from those manufacturers, we are not affiliated with or endorsed by them, and brand names, model names and part numbers are used for fitment reference only. Confirm dimensions against your own sample or drawing before ordering.
Everyone wants a list of secrets. There aren’t any. There are five decisions, and almost every squeegee problem on a floor scrubber traces back to one of them being made by default rather than on purpose. Get these five right and the blade stops being something you think about.
Rule 1: Choose material by floor and soil, not by price
Two materials cover almost every application, and they are not interchangeable.
| Natural rubber NR-65 | Cast polyurethane PU-85 | |
|---|---|---|
| Hardness | 65 ± 5 Shore A | 85 ± 5 Shore A |
| Excels on | Smooth tile, PVC, epoxy | Rough concrete, oil, grease, aggressive detergents |
| Fails on | Oily and greasy floors | Polished smooth floors where a stiff edge skips |
| Relative life in abrasive duty | Baseline | Roughly 3–5× (industry benchmark, not a guarantee) |
That last row is why polyurethane wins in warehouses and food plants. It is also why it loses in a polished retail atrium, where the softer natural rubber simply seals better. Polyurethane is not an upgrade, it is a different tool. And it is worth knowing that polyurethane is more sensitive to temperature and operating conditions than natural rubber — so a hot, chemically aggressive process is a conversation, not a default.
The expensive mistake is the reverse one: natural rubber into an oily environment. It absorbs the oil, loses structural integrity, goes wavy and stops sealing, sometimes within weeks — and the symptom looks like a machine fault. Our material comparison covers the full trade-off, including why red rubber is not automatically Linatex (red is pigment; ask for measured abrasion, tensile and rebound).
Rule 2: Fitment is dimensional, and “close enough” leaks
A blade is defined by length, thickness, slot pattern and hole pitch — not by which machine it looks like it came from. The most common expensive error is buying on nominal machine width: nominal widths round, and a rounded number leaves a blade that mounts but does not seal.
Our production tolerances are length ±1.0 mm, thickness ±0.2 mm, hole pitch ±0.5 mm. Before you release a batch to customers, dry-fit one blade onto a scrap frame. If you are unsure what fits, the cross-reference guide covers 75 models across 17 brands, and anything not listed we build to a sample or drawing.
Rule 3: Replace the set, not the piece
A squeegee assembly works as a system. The front blade dams and slows the water, the vacuum slot extracts, and the rear blade makes the final wipe. They wear at different rates — the rear usually goes first — but they only perform as a pair.
So the trade unit is 1 set = one front blade + one rear blade, and a 20-set order is 40 pieces. Replacing only the rear blade saves a few dollars and costs a second call-out. On some platforms there are additional side blades (Tennant T7, T12, T16, T20; Nilfisk BR855), sold separately — quote them explicitly.
Rule 4: Hardness is a setting, not a quality grade
This is the rule most often broken, in both directions:
- 50–75 Shore A for smooth floors — softer edges conform and seal
- 85–95 Shore A for rough or oily floors — harder edges resist cutting and tearing
Too soft and vacuum pressure folds the edge under the frame, and the machine leaks. Too hard and the edge rides over floor texture instead of sealing into it. Both look identical from the operator’s seat: “the blade is worn”. The fix is frequently a durometer change, not a new supplier.
Rule 5: Maintain the assembly, not just the blade
Blades fail early far more often from neglect than from wear. Three habits cover most of it:
- Wipe the blades each shift. Grit, string and label residue hold the edge off the floor by a millimetre. A millimetre is a streak.
- Check level monthly. One end riding high leaks at that end. Level the assembly; do not shim the blade.
- Clean the vacuum slot. A blocked slot between front and rear blades defeats the whole dual-blade design.
Get the geometry right before you add down-pressure. More pressure is not the answer to a leak — it accelerates wear and usually makes streaking worse.
How long should this last, and what should it cost
In normal commercial use, roughly two to three months per blade — a typical industry figure, not a guarantee. Frequency, floor condition, temperature and chemicals all move that number. Where the profile allows it, rotating the blade to use both edges is free extra life. If you want to convert that into a scheduled change rather than a complaint-driven one, see the replacement cycle guide.
On cost, the structure rewards testing before committing:
- 20 sets per style for models already in our tool range, no tooling
- USD 60–120 per style tooling for a new profile, waived at 500 sets — roughly USD 0.12–0.24 per set at that point
- Mixed orders allowed, USD 3,000 minimum order value
- Samples charged, 7–15 days, made to your specification rather than pulled from stock
Twenty sets on your worst floor for one full cycle will settle any material argument better than a datasheet will.
Frequently Asked Questions
Which lasts longer, rubber or polyurethane?
On rough or abrasive floors, polyurethane — roughly three to five times, as an industry benchmark. On smooth commercial floors, a good natural rubber seals better and lasts well. There is no universal winner.
Is harder better?
No. Harder resists cutting but seals worse on smooth floors. Match hardness to floor texture.
What is the minimum order?
20 sets per style for tooled models, or a mixed order at USD 3,000 minimum.
What if a blade is defective?
Claims within 7 days of receipt; manufacturing defects covered; only the defective pieces replaced; freight on the buyer, usually consolidated into your next order; unboxing video as proof.
Get the five decisions made for your floor
Send the machine model, the floor type, and whether there is oil or aggressive detergent in the process — and we will recommend the grade and hardness, confirm fitment, and quote within one business day.