Aftermarket replacement parts — not genuine OEM parts. The squeegee blades and rubber parts on this page are aftermarket replacements made to fit the machines named here (Columbus, Comac, Fimap, Gansow and others). They are not genuine parts from those manufacturers, we are not affiliated with or endorsed by them, and brand names, model names and part numbers are used for fitment reference only. Confirm dimensions against your own sample or drawing before ordering.
Europe is one of the densest markets for commercial floor cleaning equipment in the world — hospitality, healthcare, retail logistics and food processing all run scrubbers hard and on tight schedules. It is also the market where the machine brands your customers service were mostly designed: Kärcher, Nilfisk, Comac, Fimap, Taski, Hako, IPC, Columbus, Numatic and Gansow are all European. For an importer, that means the replacement blade question is not exotic — it is the daily enquiry.
What follows is what European buyers ask us, in the order they ask it.
1. “Which European machines do you cover?”
Coverage is the first question because a European importer’s fleet list is rarely single-brand. Our tool range covers 75 models across 17 brands, and the European share of that list is substantial:
| Brand | Representative models |
|---|---|
| Kärcher | BD 40, BD 50, BD 530, BD 90 |
| Nilfisk | BA 531, BA 530, BA 551, BA 651, 755, BR 752, BR 855, SC 401, SC 500, SC 3500, SC 6000, SC 430 |
| Comac | Simpla 50, Innova 55, Innova 75, Innova 85B, L20, Vispa 35, Abila 20, Abila 50 E |
| Fimap | Fimap 50, MR 85, Genie B |
| Taski (Diversey) | 455, 755, 1255, 1260, Swingo 1660, 3500, 4000, 5000, Swingo 2100 micro |
| Hako | B45, B70, B75, B90, B115R, B120, B175, B910, Hako Matic B750 R |
| IPC | CT 15, CT 40, CT 50, CT 100 |
| Columbus | RA55 B40, ARA 80 BM 100 |
| Numatic, Gansow, Minuteman | TTB 3450, CT 40 B 50, E20 |
Check the full list in the cross-reference guide; anything not listed, we build to a sample or drawing.
2. “What documentation can you provide?”
European buyers ask for chemical compliance documentation — REACH and RoHS statements in particular — and for traceability on the compound. Ask any supplier for these before you place the order, and ask whether the document is issued for your batch or copied from a generic certificate. If your market requires specific declarations, send us the requirement list with the enquiry and we will tell you what we can supply.
3. “Which material for which floor?”
Europe’s floor mix is broad: polished tile and terrazzo in retail and healthcare, epoxy in logistics, rough and sometimes oiled concrete in food processing and light industry.
| Grade | Hardness | Where it fits in Europe |
|---|---|---|
| NR-65 red natural rubber | 65 ± 5 Shore A | Retail tile, PVC, epoxy — the general commercial default |
| PU-85 cast polyurethane | 85 ± 5 Shore A | Food processing, logistics concrete, oily or chemically aggressive sites |
| GR-45 gum rubber | 45 ± 5 Shore A | Light-duty smooth floors, price-led public tenders |
The expensive mis-specification is natural rubber in food processing, where fat and oil break it down fast. Europe also has a high share of slip-resistance and hygiene compliance pressure, so water recovery quality is not just an aesthetic issue — a blade that leaves a film creates a documented hazard. Our material comparison covers the trade-off in detail.
4. “What are your commercial terms?”
The three numbers importers need up front:
- MOQ: 20 sets per style for models already in the tool range. One set is one front blade plus one rear blade, so 20 sets is 40 pieces.
- Tooling for a new profile: USD 60–120 per style, waived once the style reaches 500 sets — roughly USD 0.12–0.24 per set at that point.
- Mixed orders: allowed, with a USD 3,000 minimum order value.
That structure suits the way European importers actually buy: a first order covering ten or twelve models across the fleet, then concentration on whichever models reorder. Samples are charged and take 7–15 days to reach you.
5. “How do you handle defects across a long freight lane?”
This matters more in export than in domestic supply, because the feedback loop is weeks long and the temptation is to defer the argument. Get the terms in writing before payment: claims raised within 7 days of receipt; manufacturing defects covered — damaged edges, flash, wrong dimensions, hardness outside the agreed range; only the defective pieces replaced, not the whole shipment; freight on the buyer, which most importers handle by consolidating replacements into the next order; and an unboxing video so a claim three weeks later is still factual.
Note the clock starts at receipt, not despatch and not port arrival. Build the inspection step into your goods-in process or the window closes before anyone looks.
6. “How often will my customers reorder?”
In normal commercial use, roughly two to three months per blade. Treat that as a typical industry figure, not a guarantee — cleaning frequency, floor condition, temperature and chemicals all move it, and polyurethane grades are more sensitive to those variables than natural rubber. For an importer this is the actual business model: blades are not a project, they are a rhythm. Our replacement cycle guide shows how to convert the interval into a standing order.
7. “Can we sell it under our own name?”
Yes. Private label and custom printed cartons are available, and for most European distributors this is the point — the blade is the part that reorders, so it is the part worth putting your brand on. The commercial case for carrying aftermarket rather than OEM is set out in OEM vs aftermarket squeegee blades.
Frequently Asked Questions
What is the minimum first order for Europe?
20 sets per style for tooled models, or a mixed order at USD 3,000 minimum value.
Do you cover Hako B45 and B115R specifically?
Yes — both, along with B70, B75, B90, B120, B175 and B910. Details in Hako B45 and B115R squeegee blades.
Are samples free?
No. Samples are charged and take 7–15 days, because they are made to your specification.
Is there a warranty?
No warranty language — a specific, executable replacement policy instead, on the terms above.
Start with your fleet list
Send the models your customers run and the destination, and we will confirm coverage, flag anything that needs tooling, recommend grades by floor type, and quote within one business day.