Before you choose a squeegee blades kit, you need to learn more about the hardness of squeegee blades. Since there have different hardness from 50A to 95A. Usually 60A is soft, 70A is medium, and 80A is a hard Squeegee, and 90A is extra hard. Typical urethane squeegee blades are an 80A, however, they can be produced in hardness from 30A-75D durometer, which ensures cut resistance and resiliency. The major advantages of the urethane squeegee blades include high load-carrying capability, high dielectric strength and non-magnetic with protection against marring/galling with a long life while still offering abrasion resistance.
Learn about the hardness of rubber squeegee blades.
In general, the substrate and the mesh will directly determine the choice of hardness tester. For example, if the substrate has an irregular or rough surface and a coarse mesh is required, then a squeegee with a hardness gauge between 60-70A is recommended. However, if the substrate is smooth and a high mesh count is used, then a harder squeegee with a hardness between 80-90 should be used.
If the floor washer is heavy and the rubber strip is too wide it could mark the floor.
If the floor washer is heavy and the rubber strip is too wide it could mark the floor. The heavier the floor washer, the more likely it is to leave marks. The wider your squeegee blade’s rubber strip, the more likely it will leave marks on your floor. If you need to remove stubborn stains from your floors but don’t want any damage done in doing so, then narrow blades are recommended for this task because they won’t scratch or gouge wood floors like wider ones can do over time.
A squeegee with a narrow rubber strip will not cause any damage to the floor.
If the washer is heavy and the rubber strip is too wide, it may leave marks on the floor. The heavier the washing machine, the more likely it is to leave marks. The wider the rubber strip of the eraser, the more likely it is to leave marks on the floor. If you need to remove stubborn stains from your floor but don’t want to cause any damage in the process, narrow blades are recommended because they won’t scratch or scrape on the wood floor as much as a wide blade would. If the sweeper is heavy and the rubber strips are too wide, they may leave marks on the floor. The heavier the washing machine, the more likely it is to leave marks. The wider the rubber strip of the eraser, the more likely it is to leave marks on the floor. If you need to remove stubborn stains from your floor but don’t want to cause any damage in the process, narrow blades are recommended because they won’t scratch the wood floor over time like wide blades do.
Squeegees should be used at a 45 degree angle to avoid leaving marks on the floor.
The squeegee blades should be at a 45 degree angle to the floor so that the pressure from your hand is evenly distributed and not concentrated in one spot. This will prevent damage to the floor.
Use a narrow rubber strip to prevent marking your floor
If you’re going to be doing a lot of floor cleaning, it’s a good idea to use narrow rubber strips. This will prevent marking on the floor. If you are going to be doing a lot of floor cleaning, it is a good idea to use a narrow rubber strip. This will prevent marking on the floor. Use a 45 degree angle when applying and use an eraser brush with a narrow rubber strip to make it easier to get into corners and along walls.
Conclusion
We hope that this article has helped you to understand rubber materials. If you would like to learn more about the types of squeegees. Please check our below article in detail.
